Download

Densità dei materiali di uso comune nella meccanica

Le densità che MechPilot usa per calcolare la massa di una parte, ognuna con il documento da cui proviene e come è stata verificata.

MaterialeNormaDensità (kg/m³)VerificaFonte
Acciaio strutturale S235JREN 10025-27850primaryEN 1993-1-2:2005, 3.2.2 (unit mass of carbon steel ρa = 7850 kg/m³); S 235 to EN 10025-2 is a steel covered by EN 1993-1-1:2005, 3.1, Table 3.1
Acciaio strutturale S355J2EN 10025-27850primaryEN 1993-1-2:2005, 3.2.2 (unit mass of carbon steel ρa = 7850 kg/m³); S 355 to EN 10025-2 is a steel covered by EN 1993-1-1:2005, 3.1, Table 3.1
Acciaio al carbonio C45 (1.0503)EN 10083-27850secondaryKIPP material data 1.0503 / C45 (7.85 g/cm³) and West Yorkshire Steel C45 typical physical properties (7.85 kg/dm³). EN 10083-2 was not seen to give a density; C45 is not a structural steel in the scope of EN 1993-1-2, so that standard's 7850 kg/m³ is not cited for C45.
Acciaio inossidabile X5CrNi18-10 (1.4301)EN 10088-17900primaryEN 10088-1:2005, Annex A (informative), Table A.3 (guidance data on physical properties of austenitic corrosion resisting steels: X5CrNi18-10 / 1.4301, density 7.9 kg/dm³) Read in the 2005 edition (an unofficial copy of BS EN 10088-1:2005); the current edition is EN 10088-1:2023. EN 1993-1-2:2005, C.2.2 uses 7850 kg/m³ for stainless steel in fire design; MechPilot uses the EN 10088-1 material value.
Lega di alluminio EN AW-6082EN 573-32700primaryEN 1999-1-1:2007+A1:2009, 3.2.5 (unit mass ρ = 2 700 kg/m³ for the aluminium alloys covered by EN 1999-1-1; EN AW-6082 is in Table 3.1a) EN 1999-1-1 gives one design value for all the alloys it covers, not a per-alloy density.
Lega di alluminio EN AW-5754EN 573-32700primaryEN 1999-1-1:2007+A1:2009, 3.2.5 (unit mass ρ = 2 700 kg/m³ for the aluminium alloys covered by EN 1999-1-1; EN AW-5754 is in Table 3.1a) EN 1999-1-1 gives one design value for all the alloys it covers, not a per-alloy density (see docs/to-verify.md).
Ottone CuZn37 (CW508L)EN 1652 / EN 121638440secondaryDeutsches Kupferinstitut, Werkstoff-Datenblatt CuZn37, 3.1 (8.44 g/cm³ at 20 °C); Diehl Brass Solutions datasheet 023 (8.44 g/cm³); Schlenk CuZn37 datasheet (8.44 g/cm³)
Rame Cu-ETP (CW004A)EN 135998900secondaryAurubis datasheet PNA 211 Cu-ETP (8.9 g/cm³ at 20 °C); KME/Kemper Cu-ETP datasheet (8.9 g/cm³) Schlenk's Cu-ETP datasheet gives 8.93 g/cm³; the two datasheets that agree give 8.9 to one decimal.
Ghisa grigia EN-GJL-250EN 15617200secondaryKIPP material data EN-GJL-250 (7.20 g/cm³); EN 1561 GJL-250 property summary on mfgrobots.com (7.2 g/cm³ at 20 °C). EN 1561's own text was not seen. The weakest-sourced entry in this file (one supplier datasheet plus an aggregator site), see docs/to-verify.md.
Poliossimetilene copolimero (POM-C)ISO 1043-1 (symbol POM)1410secondaryRöchling Sustarin C DWS natural (1.41 g/cm³, DIN EN ISO 1183-1); Ensinger TECAFORM AH natural (1.41 g/cm³)
Poliammide 6 (PA 6), estrusaISO 1043-1 (symbol PA)1140secondaryRöchling Sustamid 6 (1.14 g/cm³, DIN EN ISO 1183-1); BW Kunststoffe PA 6 extruded (1.14 g/cm³, ISO 1183) Cast PA 6 is slightly denser (BW Kunststoffe gives 1.15 g/cm³ for cast PA 6).
Polietilene ad alta densità (PE-HD, PE 300)ISO 1043-1 (symbol PE-HD)950secondarySIMONA PE-HD naturel datasheet rev. 29.04.2022 (0.950 g/cm³, DIN EN ISO 1183); Oadby Plastics PE-HD 300 datasheet (0.95 g/cm³, DIN EN ISO 1183) Ensinger TECAFINE PE300 natural gives 0.96 g/cm³ and Röchling Polystone G HD natural > 0.95 g/cm³; the value depends on the grade.

Note del file di dati

  • Densities vary with alloy, temper, casting and grade (plastics also with filler and processing). MechPilot computes mass from these values and shows it as approximate, with the material and the source of its density.
  • nameIt is MechPilot's own Italian translation; it was not taken from the Italian editions of the standards.
  • PTFE is not in this file: the datasheets read disagree (Ensinger TECAFLON PTFE natural 2.15 g/cm³, Plastock extruded virgin PTFE 2.16 g/cm³, BW Kunststoffe 2.15 to 2.25 g/cm³). See docs/to-verify.md.

Fonte e verifica

Le citazioni dal file di dati sono in inglese, come sono scritte lì.

Norma
see each material (densitySource)
Verifica
secondary (due fonti secondarie indipendenti concordano)
Verificato su
Note sulla verifica
  • primary = the density was read in the standard's own text; secondary = two or more independent manufacturer or supplier datasheets agree (listed in docs/to-verify.md). The file is marked secondary because that is its weakest entry.
  • All values were read on 2026-10-22.
  • EN 1993-1-1:2005, 3.2.6 lists E, G, Poisson's ratio and the thermal expansion coefficient for structural steel but no density; the 7850 kg/m3 value is EN 1993-1-2:2005, 3.2.2.
File di dati
library/materials/common.json

I valori che non è stato possibile verificare sulla norma sono omessi ed elencati in docs/to-verify.md. Controllate la norma stessa prima di affidarvi a un valore in produzione, e segnalate ogni errore su GitHub. to-verify.md · Issue